1100 Series Slow Rotation Swivel

1102 Series Slow Rotation Swivel

• Threaded swivel joints for use in applications where complete rotation is not necessary. Designed for swiveling or slow rotation applications.
• Available in sizes from 1/4" to 6," and can be used at pressures up to 1160 psi (80 bar).
• This series has a GR seal and is available with axial (straight through) flow, or radial flow with the addition of a 90° stainless steel elbow.
• Features nickel treated carbon steel construction. Stainless steel models are also available.
• Our 1102 Series offers two ball bearings which allow for increased pressure and speed.

• Threaded swivel joints for use in applications where complete rotation is not necessary. Designed for swiveling or slow rotation applications.
• Available in sizes from 1/4" to 3" and can be used at pressures up to 725 psi (50 bar).
• This series has a GR seal and is available with axial (straight through) flow, or radial flow with the addition of a 90° stainless steel elbow.
• Features nickel treated carbon steel construction. Stainless steel models are also available.

1200 / 1400 Series Small Envelope Swivel

• Perfect for very small envelope dimensions and slow or swiveling rotation.
• Our 1200 Series features a female NPT inlet and a male NPT shaft at 90 degrees in a compact form.
• Our 1400 Series is available with a male shaft and either a male or female inlet.
• Our 1400 Series is available in commonly used straight or tapered thread forms, including SAE, NPT, JIC, DIN or ISO
• Both the 1200 & 1400 Series are nickel treated as standard and are also available in stainless steel.

1300 Series Flanged Swivel

• Range in size from 2" through 12".
• Used in applications where slow rotation or swiveling motion is needed.
• Suitable for use at pressures up to 290 psi.
• Standard models feature nickel treated carbon steel construction, but are also available with a stainless steel shaft.
• Design features include a ball bearing for rotation, and a GR seal.
• Can be used in applications with temperatures up to 392° F (200° C)

1700 Series High Pressure Swivel

• High pressure Rotary Union® for use in hydraulic and pneumatic applications.
• Equipped with a GR seal suitable for most transfer fluids.
• Designed for use in medium to high pressure applications (to 5075 psi)
• The high pressure capability of this series is obtained with the use of a Single Acting Thrust Bearing which permits slow rotation.

1900 Series High Pressure Swivel

• High pressure Rotary Union® for use in hydraulic and pneumatic applications.
• Equipped with a GR seal suitable for most transfer fluids.
• Standard models feature nickel treated carbon steel construction, but are also available in all stainless steel.
• Designed for use in very high pressure applications (to 10,150 psi)
• Equipped with a Double Acting Thrust Bearing and a Bronze Bushing. The bearing permits higher pressure, while the bushing increases the guide of the shaft to allow faster rotating speeds than our 1700 Series.