Rotary Counters
Rotary Counters provide an economical and easy way to determine an actuator’s position.
Read MoreHand Wheel
The hand wheel is for actuators that require precise positioning, or have loads which do not require motorized power to adjust.
Read MoreFlange
Flange Blocks lock on to the end of the rotating screw, and can then be bolted on to the machine or fixture. This ensures that the load being carried by the actuator’s lifting nut is properly guided.
Read MorePillow Block
Pillow Blocks are designed to operate with actuators, shafts, and couplings. Pillow Blocks may be used in any shafting configuration for additional shaft support.
Read MoreEncoders
Encoders are used to synchronize, position, or vary the speed of an electric motor.
Read MoreCMLA A Series – 500 lbs
VOLTAGE: 115 or 230 VACSCREW TYPE: Ball screw or trapezoidSTANDARD STROKE: 100 to 600 mmSPEED: 14.2to 28.5 mm/sTEMPERATURE RANGE: -20ºC to 65ºCENVIRONMENT RATING: IP66S protection
Read MoreSPA Series with Intelli-Motion™
VOLTAGE: 115V, 1P, 50-60 Hz STANDARD STROKES: 6 to 24 inchesSPEED: 0.83 in/s Full Load, 1.52 in/sec Half LoadTEMPERATURE RANGE: 25°F–104°F (-4°C–40°C)ENVIRONMENTAL RATING: IP54 protectionCAPACITY: 1500 lbsSOFTWARE DOWNLOAD: Visit download page
Read MoreXT Series
The XT Series linear actuator offers safe operation with internal limit switches to stop motion at fully retracted and fully extended position. Featuring IP66 protection this linear actuator is made to withstand the elements and designed for outdoor use. FEATURES & BENEFITS: OPTIONS:
Read MoreCMLA D Series – 2000 lbs
VOLTAGE: 230/460 VAC/3 PH/60 HzSCREW TYPE: Ball screwSTANDARD STROKE: 3.9 to 23.6 in (100 to 600 mm) TEMPERATURE RANGE: -4ºF to 150ºF (-20ºC to 65ºC)ENVIRONMENTAL RATING: IP66S protection standard
Read MoreCMLA C Series – 1,500 lbs
VOLTAGE: 115 or 230 VACSCREW TYPE: Ball screw or trapezoidal screwSTANDARD STROKE: 3.9 to 23.6 in (100 to 600 mm) TEMPERATURE RANGE: -4ºF to 150ºF (-20ºC to 65ºC)ENVIRONMENTAL RATING: IP66S protection standard
Read More